Mounting Options for Gemini Minnesota Letters in Standard Block font style:
1a - Plain - 90% of Price - Plain Standard Block font letters are shipped without any mounting hardware.
2a - Stud - Price as listed above - Studs are metal threaded posts on the rear of the Standard Block letters. Specify if studs need to be in line for brick or block wall mortar joints. When installed, studs typically extend approximately. 1-1/2"-2" from the back of the letters. Other available length studs for Standard Block fonts are available from dimensionalLetters.com. (Brick: 2-5/8" on center; Block: 8" on center)
2b - Pad - Price as listed above - Pads are plastic disks on the rear of the letters. Adjustable or flush pads available upon request. Pad mount only recommended on letters less than 24" tall.
2c - Combination - Price as listed above - Combination has pads at the bottom and studs through pads at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6". dimensionalLetters.com recommends this installation method for Standard Block fonts for building and wall letters. This gives the strength of the stud mount while drilling half as many holes.
2d - Combination All - Price as listed above - Combination All has studs through pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".
|
