PayPal Verified

3/8" Thick (9 mm) Laser Cut Acrylic Logos

All pricing for 3/8 inch thick acrylic laser cut letters is plain mount.

Sizes not shown or fractional heights, round up to the next size.

Logos under 6 inches will be priced as 6 inches.

Painted finish is an additional 30% - Color match is $20 per color.

Installation templates are available at $3.25 per letter.

Shipping: Maximum UPS size is 36" x 48", larger sizes ship by truck.

Logos with 3 or more pieces may have additional charges.

Double Face 3M-VHB Tape should be used with silicone when installing outside.

	6"	8"	10"	12"	14"	16"	18"	20"	22"	24"	26"	28"	30"	32"	34"	36"	38"	40"	42"	44"	46"	48"
6"	13	17	21	24	28	32	35	39	43	47	50	54	58	62	65	69	73	76	80	84	88	91
8"	16	21	26	31	36	41	46	51	56	61	66	71	76	81	86	91	96	101	106	111	116	121
10"	20	26	33	39	45	51	57	64	70	76	82	89	95	101	107	113	120	126	132	138	145	151
12"	24	31	39	46	54	61	69	76	84	91	98	106	113	121	128	136	143	151	158	166	173	181
14"	28	36	45	54	62	71	80	89	97	106	115	123	132	141	150	158	167	176	184	193	202	211
16"	31	41	51	61	71	81	91	101	111	121	131	141	151	161	171	181	191	201	211	221	231	240
18"	35	46	57	69	80	91	102	113	125	136	147	158	169	181	192	203	214	226	237	248	259	270
20"	39	51	64	76	89	101	113	126	138	151	163	176	188	201	213	226	238	250	263	275	288	300
22"	42	56	70	84	97	111	125	138	152	166	179	193	207	221	234	248	262	275	289	303	317	330
24"	46	61	76	91	106	121	136	151	166	181	196	211	226	241	255	270	285	300	315	330	345	360
26"	50	66	82	98	115	131	147	163	179	196	212	228	244	260	277	293	309	325	341	358	374	390
28"	54	71	89	106	123	141	158	176	193	211	228	246	263	280	298	315	333	350	368	385	403	420
30"	57	76	95	113	132	151	169	188	207	226	244	263	282	300	319	338	356	375	394	412	431	450
32"	61	81	101	121	141	161	181	201	221	241	260	280	300	320	340	360	380	400	420	440	460	480
34"	65	86	107	128	150	171	192	213	234	255	277	298	319	340	361	383	404	425	446	467	489	510
36"	69	91	113	136	158	181	203	226	248	270	293	315	338	360	383	405	427	450	472	495	517	540
38"	72	96	120	143	167	191	214	238	262	285	309	333	356	380	404	427	451	475	498	522	546	570
40"	76	101	126	151	176	201	226	250	275	300	325	350	375	400	425	450	475	500	525	550	575	599
42"	80	106	132	158	184	211	237	263	289	315	341	368	394	420	446	472	498	525	551	577	603	629
44"	83	111	138	166	193	221	248	275	303	330	358	385	412	440	467	495	522	550	577	604	632	659
46"	87	116	145	173	202	231	259	288	317	345	374	403	431	460	489	517	546	575	603	632	661	689
48"	91	121	151	181	211	240	270	300	330	360	390	420	450	480	510	540	570	599	629	659	689	719

Mounting options and pricing
	Price listed above Plain letters are shipped without any mounting hardware. Recommended by dimensionalLetters.com for customers that will be installing their own two-sided foam tape or just using silicone to attach to project.
	Add 5% to Price listed above Studs are metal threaded posts on the rear of the letters. Specify if studs need to be in line for brick or block wall mortar joints. When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters. (Brick: 2-5/8" on center; Block: 8" on center)
	Add 5% to Price listed above Pads are plastic disks on the rear of the letters. Adjustable or flush pads available upon request.
	Add 5% to Price listed above Combination has pads at the bottom and studs through pads at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6". This type of mounting is recommended by dimensionalLetters because the installation of the 3/8" Plastic letters requires only holes to be drilled for the top half of the letter.
	Add 5% to Price listed above Combination All has studs through pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".
	Add 5% to Price listed above Strips of 3M-VHB (Very High Bond acrylic foam closed cell double-coated pressure sensitive adhesive tape) tape are placed strategically on the back of the 3/8 inch dimensional wall letters. Follow 3M recommendations for use. Not suitable for all mounting surfaces. surface preparation
	Add 25% to Price listed above Letters/logos 3/8" and thicker can be drilled and tapped to receive studs. Studs are metal threaded posts on the rear of the letters. Specify if studs need to be in line for brick or block wall mortar joints. When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters. (Brick: 2-5/8" on center; Block: 8" on center)
	This new smaller stud block is only 1/4" OD and threaded to receive a 6-32 (1/8" diameter) stud. Great option for thin gauge, thin stroke letters that need to be mounted flush to the surface.


2222-Clear	2225-Optical Clear	7508-White	2718-Ivory	4660-Desert Sand


2037-Lemon Yellow	2119-Orange	2662-Red-Orange	2793-Red	2240-Maroon


2287-Purple	2280-Black Cherry	2767-Midnight Blue	2050-Dark Blue	2860-Medium Blue


3000-Blue	2648-Light Blue	3210-Teal Blue	3555-Spring Green	2108-Light Green


2030-Dark Green	2162-Hunter Green	2418-Brown	3130-Duranodic Bronze	2756-Metallic Gold


8886-Silver	8807-Platinum	2025-Black