PayPal Verified

1/4" Thick (6 mm) Laser Cut Acrylic Logos

All pricing for 1/4 inch thick acrylic laser cut letters is plain mount.

Sizes not shown or fractional heights, round up to the next size.

Logos under 6 inches will be priced as 6 inches.

Painted finish is an additional 30% - Color match is $20 per color.

Installation templates are available at $3.25 per letter.

Shipping: Maximum UPS size is 36" x 48", larger sizes ship by truck.

Logos with 3 or more pieces may have additional charges.

Double Face 3M-VHB Tape should be used with silicone when installing outside.

	6"	8"	10"	12"	14"	16"	18"	20"	22"	24"	26"	28"	30"	32"	34"	36"	38"	40"	42"	44"	46"	48"
6"	9	11	14	16	19	21	24	26	29	31	34	36	39	41	44	46	49	52	54	57	59	62
8"	11	14	17	21	24	27	31	34	37	41	44	48	51	54	58	61	64	68	71	74	78	81
10"	13	17	22	26	30	34	38	42	47	51	55	59	63	68	72	76	80	84	89	93	97	101
12"	16	21	26	31	36	41	46	51	56	61	66	71	76	81	86	91	96	101	106	111	116	121
14"	18	24	30	36	42	47	53	59	65	71	77	82	88	94	100	106	112	118	123	129	135	141
16"	21	27	34	41	47	54	61	67	74	81	87	94	101	107	114	121	127	134	141	148	154	161
18"	23	31	38	46	53	61	68	76	83	91	98	106	113	121	128	136	143	151	158	166	173	181
20"	26	34	42	51	59	67	76	84	92	101	109	117	126	134	142	151	159	167	176	184	192	201
22"	28	37	47	56	65	74	83	92	102	111	120	129	138	147	157	166	175	184	193	202	211	221
24"	31	41	51	61	71	81	91	101	111	121	131	141	151	161	171	181	191	201	211	221	231	241
26"	33	44	55	66	77	87	98	109	120	131	142	152	163	174	185	196	206	217	228	239	250	260
28"	36	48	59	71	82	94	106	117	129	141	152	164	176	187	199	211	222	234	245	257	269	280
30"	38	51	63	76	88	101	113	126	138	151	163	176	188	201	213	226	238	250	263	275	288	300
32"	41	54	68	81	94	107	121	134	147	161	174	187	201	214	227	240	254	267	280	294	307	320
34"	44	58	72	86	100	114	128	142	157	171	185	199	213	227	241	255	270	284	298	312	326	340
36"	46	61	76	91	106	121	136	151	166	181	196	211	226	240	255	270	285	300	315	330	345	360
38"	49	64	80	96	112	127	143	159	175	191	206	222	238	254	270	285	301	317	333	348	364	380
40"	51	68	84	101	118	134	151	167	184	201	217	234	250	267	284	300	317	334	350	367	383	400
42"	54	71	89	106	123	141	158	176	193	211	228	245	263	280	298	315	333	350	368	385	402	420
44"	56	74	93	111	129	148	166	184	202	221	239	257	275	294	312	330	348	367	385	403	422	440
46"	59	78	97	116	135	154	173	192	211	231	250	269	288	307	326	345	364	383	402	422	441	460
48"	61	81	101	121	141	161	181	201	221	241	260	280	300	320	340	360	380	400	420	440	460	480

Mounting options and pricing
	Price listed above Plain letters are shipped without any mounting hardware. Recommended by dimensionalLetters.com for customers that will be installing their own two-sided foam tape or just using silicone to attach to project.
	Add 5% to Price listed above Studs are metal threaded posts on the rear of the letters. Specify if studs need to be in line for brick or block wall mortar joints. When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters. (Brick: 2-5/8" on center; Block: 8" on center)
	Add 5% to Price listed above Pads are plastic disks on the rear of the letters. Adjustable or flush pads available upon request.
	Add 5% to Price listed above Combination has pads at the bottom and studs through pads at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6". This type of mounting is recommended by dimensionalLetters because the installation of the 1/4" Plastic letters requires only holes to be drilled for the top half of the letter.
	Add 5% to Price listed above Combination All has studs through pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6".
	Add 5% to Price listed above Strips of 3M-VHB (Very High Bond acrylic foam closed cell double-coated pressure sensitive adhesive tape) tape are placed strategically on the back of the 1/4 inch dimensional wall letters. Follow 3M recommendations for use. Not suitable for all mounting surfaces. surface preparation
	Add 25% to Price listed above Letters/logos 3/8" and thicker can be drilled and tapped to receive studs. Studs are metal threaded posts on the rear of the letters. Specify if studs need to be in line for brick or block wall mortar joints. When installed, studs typically extend approx. 1-1/2"-2" from the back of the letters. (Brick: 2-5/8" on center; Block: 8" on center)
	This new smaller stud block is only 1/4" OD and threaded to receive a 6-32 (1/8" diameter) stud. Great option for thin gauge, thin stroke letters that need to be mounted flush to the surface.


2222-Clear	2225-Optical Clear	7508-White	2718-Ivory	4660-Desert Sand


2037-Lemon Yellow	2119-Orange	2662-Red-Orange	2793-Red	2240-Maroon


2287-Purple	2280-Black Cherry	2767-Midnight Blue	2050-Dark Blue	2860-Medium Blue


3000-Blue	2648-Light Blue	3210-Teal Blue	3555-Spring Green	2108-Light Green


2030-Dark Green	2162-Hunter Green	2418-Brown	3130-Duranodic Bronze	2756-Metallic Gold


8886-Silver	8807-Platinum	2025-Black